Motorized Single-axis Table

Home > Motorized Linear Stages > Low Cost Linear Single-axis Stages


This motorized positioning table is made of aluminum alloy with an elegant black anodized surface.

It provides 75 mm of travel at a maximum speed of 10 mm per second. The drive mechanism is lead screw.

The bench size is 90 X 110 mm and has a body weight of 1.7 Kg.

The maximum load of this stage table is 20 Kg.

The resolution of 0.5 μ is achieved with a 10 micro-steps per step stepper motor driver. This linear stage is
also available with a servo motor and optical encoder.

The knob mounted on the motor allows for manual adjustment.

This stage is compatible with OES' line of
Motion Controllers..

Specifications
Type

AQ110-75

Structure Description

Travel

75 mm

Table Size 90110 mm
Lead Screw Pitch 1 mm per turn
Travel Guide

High Precision Crossed Roller

Motor
Phase Resistance 3.8 Ohm, Full Coil, Bi-directional
Maximum Phase Current 1 Amp
9 pin DB-9 Male Connector
Pin Assignment and Description
1 +5 VDC for the Limit Sensors
2 Far Limit, Normally High, Active Low
3 Near Limit, Normally High, Active Low
4 Return for+5 VDC
5  
6 Phase A+
7 Phase A-
8 Phase B+
9 Phase B-
Main Material Aluminum Alloy
Surface Treatment Black Anodized
Load capacity 20 kg
Weight 1.7 kg

Typical Accuracy

Resolution 0.5μ (10 Micro-steps per Step Motor Driver in use)
0.25 μ(20 Micro-steps per Step Motor Driver in use)
Maximum Speed 10 mm/sec
Repeatability 5 μ
Positional Accuracy 10 μ
Straightness 12 μ
Driving parallelism 15 μ
Pitching 25"
Deflection 20"
Backlash 2 μ

Accessories Description

Limit Switch & Home Sensor
Grating (G)
Servo Motor (S)


Mechanical Drawing


 Ordering Information

Part No. Description Amount
AQ110-75 Motorized Linear Single-axis Stage, Travel  : 75 mm Click to Get a Quote

Motion Controllers

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us