Built-in Self Test
Three Speed Ranges, Fast, Medium, and Slow Mode,
Proportional Speed Control,
Positive and Negative Limit Switches per Axis
Zero Adjustment of Joystick on Power-up
Available to Drive Stepper, DC Servo, Brushless, and Voice Coil Motors
Optional Limit Switches per Axis
Optional External STEP and DIRECTION Signals per Axis
Totally Integrated Solution
Evaluation Unit Is Available upon Request
Stepper Motor Driver
- Up to 7 Amp Phase Current
- +12 VDC to +80 VDC Power Supply
- 2 to 256 Micro-steps per Step Resolution
- Size 8 to 42 Motors
- Auto Current Reduction
DC and Three Phase Brushless
- Up to 40 Amps Phase
- +18 VDC to +80 VDC Power
motion control system is
capable of moving a group of motors via controlling the movement of a
trackball. The speed of the
proportional to the tilt angle of the joystick or the rotational speed of the trackball.
multi-axis, multi-speed, stand-alone, easy-to-use, plug-and-play, and low
cost for manual stepper or servo motor control
applications . They can
replace or upgrade manual systems, motorizing them with precision joystick
and/or trackball control.
Each system includes
power supplies, controller,
the micro-stepper and/or servo motor drivers.
Controlling devices include analog
joystick, trackball, two-phase quadrature signals, digital potentiometer, DC voltage, and external step and direction signals.
NO PROGRAMMING IS NECESSARY.
This series is also available
without the drivers. The outputs from the system would be power, enable,
step and direction signals. This configuration is suited to interface with
the "integrated motor and drivers".
GUI to set the step rates