Stepper Motor Motion Controller
GLORIA Series

 
 
 
 
Other Step Motor Controller and Driver Products
GLORIA Series
JMC Series
ADANTE Series
ICAD Series
FIGARO Series
ALLEGRA Series
ADAGIO Series
SONATA Series
PRESTO Series
SMDS Series
Related Products
 
Rotary Step Motors
Brushless Servo Motors
DC Servo Motors
Linear Step Motors
Linear and Rotary Actuator
Accessories

Features
  • Compact

  • Plug-and-Play

  • Quick and Easy to Install

  • Very Compact and Easy to Use
     
  • Low Power Consumption

  • Small Size, DIN Rail Mountable

  • Low Power Consumption, High Torque Motors, High Speed Capability

  • Different Modes of Operation:

    1) Serially Controlled

    2) Optional Joystick / Trackball Controlled

  • Available to Drive Stepper, DC Servo and Voice Coil Motors

  • Evaluation Unit Is Available upon Request




 

Software
  • Easy System Setup and Evaluation

  • Menu Driven

  • Free Software Included

Stepper Motor Driver

  • Up to 3.5 Amp Phase Current

  • +15 VDC to +50 VDC Power Supply

  • Size 8 to 23 Motors

  • Auto Current Reduction
Dedicated Inputs
  • Positive and Negative Limit Switches per Axis

  • Home Switch per Axis

Communication Interface

This motion control module is an easy-to-use, plug-and-play and cost effective solution for single and multi-axis motion control applications.

Each module
includes the motion controller and the micro-stepper and/or servo motor drivers. It directly connects to OES line of Motorized Linear Stages, Motorized Rotary Stages, Combined-Linear-Rotary Stages
and Motorized Goniometer Stages.

The system may be controlled in different ways;

1) Externally Control Operation of Motor Control System

In this mode, the external host such as a PC, micro-controller or PLC sends a series of commands to the controller via the RS-232 serial port. The controller processes and performs the incoming commands and responds with proper messages.

2) Operating the Motor Control System Using the Supplied Control Panel

The supplied user friendly Control Panel software allows the user to set-up the module quickly. The operator is able  to move the mechanism to different positions by pressing the corresponding buttons of the Control Panel or by using the joystick and/or trackball.

1) Teach Mode 

The motion profile may be recorded using the "Teach Mode" capability of the software. This profile may be uploaded to the controller to repeat the same exact Stepper Motor.

2) Profile Entry Mode 

The motion parameters are manually entered in the control panel by typing the desired values in the corresponding fields, or may be read from a text file.

Part No. Description Amount
GLORY-01
Single-axis Stepper Motor Controller Module Click to Get a Quote
GLORY-02
Two-axis Stepper Motor Controller Module Click to Get a Quote
GLORY-03
Three-axis Stepper Motor Controller Module Click to Get a Quote
     

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us